The EPEVER Tracer AN Sequence Photo voltaic Charge Controller is often a extremely productive photo voltaic controller created for off-grid photo voltaic units. According to multiphase synchronous rectification know-how, it assures optimized Electricity conversion and procedure steadiness for a wide range of photovoltaic (PV) applications.
Important Functions in the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Solar Cost Controller technological innovation for excellent photo voltaic Electricity harvesting. Key features consist of:
Multiphase Synchronous Rectification (MSR) for improved Power conversion.
Superior MPPT Algorithm with >99% effectiveness.
Twin-Stage Charging for Improved battery daily life.
LCD Screen with true-time info monitoring.
Several Load Handle Modes such as guide and timer.
Complete Electronic Protections against overcharging, over-discharging, short circuits, and reverse polarity.
Move-by-Move Tutorial to Putting together the EPEVER Tracer AN Collection Controller
1. Unboxing and Preparing the Controller
Make certain all components are included: Tracer AN device, temperature sensor, interaction cables, and consumer guide.
Verify the product range and voltage rankings match your solar panel and battery specifications.
two. Mounting the Demand Controller
Decide on a effectively-ventilated, dry place close to the battery lender.
Protected the Tracer AN controller using the provided mounting brackets.
Retain good clearance for warmth dissipation.
three. Wiring the Photo voltaic Charge Controller
Caution: Always follow right protection protocols and ensure the program is powered off before connecting parts.
Phase 1: Join the battery terminals into the cost controller (optimistic to optimistic, negative to destructive).
Stage 2: Join the photo voltaic panel array towards the PV input terminals.
Action three: Link the load terminals if using a immediate load relationship.
Action 4: Double-Look at all connections for polarity and tightness.
4. Configuring the Controller Settings
Ability about the controller by connecting the battery very first.
Use the Liquid crystal display Screen to navigate the settings menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Manual, timer, gentle Handle.
five. Monitoring and Data Logging
The Tracer AN Collection supports actual-time checking using the MT50 More info distant meter.
Knowledge may be logged by means of the RS485 conversation port using software package for example Solar Station Laptop.
Remote checking is possible Along with the EPEVER WiFi module.
six. Troubleshooting Widespread Challenges
Concern one: No Electrical power Output
Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue 2: Over-Voltage Protection
Verify the solar array’s voltage rating.
Modify technique parameters if necessary.
Issue 3: No Battery Charging
Inspect PV wiring for continuity.
Ensure MPPT configurations while in the menu.
Great things about the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification technological innovation guarantees:
Higher Effectiveness: Lessened Vitality losses all through conversion.
Increased Dependability: Secure overall performance under variable loads.
More time Battery Life: Regular and exact charging profiles.
Summary
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification know-how is surely an Fantastic option for optimizing solar energy generation and increasing battery lifestyle. By following the above set up guidebook, consumers can ensure highest performance and system longevity.