The EPEVER Tracer AN Collection Photo voltaic Cost Controller is actually a really efficient solar controller made for off-grid solar programs. Depending on multiphase synchronous rectification technological know-how, it ensures optimized Power conversion and program balance for a wide array of photovoltaic (PV) apps.
Critical Options on the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Charge Controller technology for exceptional solar Power harvesting. Important functions include things like:
Multiphase Synchronous Rectification (MSR) for enhanced Strength conversion.
State-of-the-art MPPT Algorithm with >99% efficiency.
Twin-Stage Charging for Increased battery daily life.
LCD Display with real-time details checking.
Several Load Handle Modes such as handbook and timer.
Extensive Digital Protections from overcharging, about-discharging, quick circuits, and reverse polarity.
Move-by-Action Tutorial to Putting together the EPEVER Tracer AN Sequence Controller
1. Unboxing and Getting ready the Controller
Make sure all components are bundled: Tracer AN device, temperature sensor, conversation cables, and user guide.
Verify the model amount and voltage rankings match your solar panel and battery specs.
two. Mounting the Cost Controller
Choose a well-ventilated, dry area near to the battery bank.
Protected the Tracer AN controller using the provided mounting brackets.
Retain suitable clearance for heat dissipation.
three. Wiring the Solar Demand Controller
Caution: Always comply with appropriate protection protocols and ensure the system is run off prior to connecting parts.
Action 1: Connect the battery terminals to your cost controller (constructive to beneficial, detrimental to unfavorable).
Step two: Connect the photo voltaic panel array to the PV enter terminals.
Step three: Link the load terminals if employing a direct load relationship.
Step four: Double-check all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electrical power to the controller by connecting the battery initial.
Make use of the Liquid crystal display Display screen to navigate the settings menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, light-weight Handle.
five. Checking and Info Logging
The Tracer AN Sequence supports genuine-time checking using the MT50 remote meter.
Info is usually logged through the RS485 interaction port utilizing program for example Photo voltaic Station Computer.
Distant monitoring can be done Together with the EPEVER WiFi module.
six. Troubleshooting Widespread Problems
Challenge 1: No Ability Output
Check out battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Challenge 2: Over-Voltage Security
Confirm the photo voltaic array’s voltage rating.
Regulate method parameters if necessary.
Situation 3: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT settings while in the menu.
Great things about the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification technological innovation makes sure:
Larger Performance: Lowered energy losses through conversion.
Enhanced Dependability: Secure effectiveness less than variable masses.
For a longer time Battery Everyday living: Steady and exact charging profiles.
Conclusion
The EPEVER Solar Charge Controller with multiphase synchronous rectification technologies is an Excellent Read more choice for optimizing solar power era and increasing battery lifestyle. By adhering to the above mentioned setup manual, consumers can assure utmost efficiency and method longevity.